How to Land at Lorville

Approaching Lorville

Lorville is covered by no-fly zones, so head for dead-centre of the city from high altitude on a vertical approach. The landing site is composed of a series of subterranean hangers covered by two sliding doors that look like landing pads when seen from above.

An edited screenshot to locate the hangers at Lorville from the air
A marked screenshot locating the hangers at Lorville. One of the hangers has opened to allow a ship to exit.

A marked screenshot locating the hangers at Lorville. One of the hangers has opened to allow a ship to exit.

Hanger Landing Sequence

  1. Descend to Lorville using full thrust and afterburner SHIFT
  2. When you are close to the hangers switch off cruise control C
  3. Position yourself directly above the hangers in order to avoid going through a no-fly zone
  4. Anytime after 8000 meters, you can request a landing pad:
    1. Click F1 to open the mobiGlass
    2. Click the Comms button at the bottom left of the display
    3. At the top-left of the display, choose the Comms tab
    4. Click on Lorville Landing Services, to initiate a landing request.
    5. A hanger roof will be opened for a period of time.
  5. To keep things simple, you can enter the hanger nose downward and level up later.
  6. After landing, switch off the engine and press Y to exit the cockpit seat
  7. Go to the alcove at the far end of the hanger
  8. Go underneath the hanger number bearing left to find the elevator
  9. Go up to the Teasa Spaceport
Landing a ship in a Lorville hanger. The hatch is open for a limited period

Use the marker to guide you to the correct hanger. The marker and green rectangle are on the ground, several meters below the open roof. Once you are inside the landing zone you can initiate auto-landing.

a pattern of red lights around the hangers

At night the hangers can be identified as a cluster of flashing red lights in the middle of Lorville. The hangers are at the centre of the lights, shown here inside a rounded rectangle.